Filter
Top Products
General Information
101
3
1
### means a number within the range of 000 to 255. On connection to the network, if the machine's ‘Boot Method’ is ‘Auto’ the machine will attempt
to set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA IP address will
be allocated, such as 169. 254. [001-254]. [000-255]. If the ‘Boot Method’ of the machine is set to ‘Static’ you must manually enter an IP address
from the machine's control panel.
Network Reset Restores all network settings of the internal print server to the factory settings.
Reset Menu
Type of Reset Description
Network Restores all network settings of the internal print server to the factory settings.
Factory Reset Resets the machine and restores the printer settings (including command settings) to the
factory settings.
The factory settings are shown in Bold with an asterisk.
Color Correction
Submenu Menu Selections Options Descriptions
Calibration Calibrate a Yes b No Performs a calibration to check and correct
the colors.
Reset a Reset b Exit Set the calibration parameters back to the
default settings.
Registration - a Yes b No Aligns the print position of each color.
Auto Correction - On* / Off Sets the machine to perform Color
Calibration and Registration automatically.
The factory settings are shown in Bold with an asterisk.
Network for HL-L8350CDW and HL-L8350CDWT (continued)
Submenu 1 Submenu 2 Menu Selections Options Descriptions
The factory settings are shown in Bold with an asterisk.