Filter
Top Products
General Information
92
3
General Setup
Submenu Menu Selections Options Descriptions
Local Language - English* / Français... Select the LCD language for your
country.
Ecology Toner Save On / Off* Increases the page yield of the toner
cartridge.
Sleep Time 0 / 1 / 2 / 3* / 4 / 5 / ... Min Set the time to return to Power Save
mode.
Quiet Mode On / Off* Decreases printing noise.
Auto Power Off Off* / 1 hour / 2 hours /
4 hours / 8 hours
Sets the number of hours that the
machine will remain in Deep Sleep
mode before going into Power Off
mode. Choose Off if you do not
want the machine to go into Power
Off mode.
Panel Control Button Repeat 0.1* / 0.4 / 0.6 / 0.8 /
1.0 / 1.4 / 1.8 / 2.0 Sec
Sets the time for the LCD message
to change when holding a or b at
intervals.
Message Scroll Level1* / Level2 / ... /
Level10
Sets the time in seconds that an LCD
message will scroll across the LCD.
From Level 1=0.2 sec to Level
10=2.0 sec.
LCD Contrast -nnonn+ Adjusts the contrast of the LCD.
Auto Online On* / Off Set the machine to return to Ready
mode after it has been idle for 30
seconds. If you select Off, the
machine cannot receive print jobs if it
has been left in Menu mode.
Setting Lock - On / Off* Turn the lock panel settings On or
Off by using the password.
Interface Select Auto* / USB / Network Choose the interface to use.
If you select Auto, the machine
changes the interface to USB or
Ethernet depending on which
interface is receiving data.
Auto IF Time 1 / 2 / 3 / 4 / 5* / ... / 99Sec You must set the time-out period for
the auto interface selection.
Input Buffer Level 1 / 2 / 3 / 4* / ... / 7 Increases or decreases the input
buffer capacity.
The factory settings are shown in Bold with an asterisk.