Filter
Top Products
General Information
111
3
Color Correction 3
The output density and print position for each color may vary depending on the machine's environment, such
as temperature and humidity.
Color Calibration 3
Calibration helps you improve the color density.
NOTE
• If you are using the Windows
®
printer driver, the driver will get the calibration data automatically if both
the Use Calibration Data and Get Device Data Automatically check boxes are selected. The default
settings are On. See Color Calibration on page 47.
• If you are using the Macintosh printer driver, you must perform the calibration using the Status Monitor.
Turn on the Status Monitor, and then select Color Calibration from the Control menu. See Status Monitor
on page 82 for how to turn on the Status Monitor.
Calibrate
a Press a or b ( + or -) to choose Color Correction. Press OK.
b Press a or b ( + or -) to choose Calibration. Press OK.
c Press a or b ( + or -) to choose Calibrate. Press OK.
d Press a to choose Yes.
The machine performs the Calibration and then returns to Ready mode.
Reset
Reset the calibration parameters back to those set at the factory.
a Press a or b ( + or -) to choose Color Correction. Press OK.
b Press a or b ( + or -) to choose Calibration. Press OK.
c Press a or b ( + or -) to choose Reset. Press OK.
d Press a to choose Reset.
The LCD displays Accepted and then returns to Ready mode.