Filter
Top Products
Chapter 6
56
Memory Receive
(Black & White only)
6
You can only use one Memory Receive
operation at a time:
Fax Forwarding
Paging
Fax Storage
PC Fax Receive
Off
You can change your selection at any time. If
received faxes are still in the machine’s
memory when you change the Memory
Receive operations, a LCD question will
appear on the LCD. (See Changing Memory
Receive Operations on page 60.)
Fax Forwarding 6
When you choose Fax Forwarding, your
machine stores the received fax in the
memory. The machine will then dial the fax
number you have programmed and forward
the fax message.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Setup Receive.
Press OK.
d Press a or b to choose
Memory Receive.
Press OK.
e Press a or b to choose Fax Forward.
Press OK.
f Enter the forwarding number (up to 20
digits).
Press OK.
g Press a or b to choose
Backup Print:On or
Backup Print:Off.
Press OK.
Note
• If you choose Backup Print:On, the
machine will also print the fax at your
machine so you will have a copy. This is
the safety feature in case there is a power
failure before the fax is forwarded or a
problem at the receiving machine. This
Backup Print:On feature will not work
if Fax Preview is on.
•
The machine can store faxes approximately
24 hours if there is a power failure.
• Color faxes will be stored in the machine's
memory only if you have chosen
B&W(Max.LGR) as your Receiving
Priority setting. (See Setting the Receiving
Priority on page 54.)
h Press Stop/Exit.