Filter
Top Products
Configuring your machine for a wireless network
23
3
Step by step chart for wireless network configuration 3
For Infrastructure mode 3
a Confirm your network environment. See page 25
b Confirm your wireless network setup method. See page 26
c Configure your machine for a wireless network. See page 29
Wireless configuration and installing drivers and software have been completed.
Infrastructure mode
Connected to a computer with an access point
or
Ad-hoc mode See page 24
Connected to a wireless capable computer
without an access point
Using the Setup
Wizard from the
control panel
(Recommended)
Using the
SES/WPS/AOSS
control panel
menu
(Automatic
Wireless mode)
Using the PIN
Method of Wi-Fi
Protected
Setup™
Using the Brother
installer
application
Temporarily using
a network cable
Using the
SES/WPS/AOSS
control panel
menu
(Automatic
Wireless mode)
See page 29 See page 32 See page 34
For Windows
®
See page 36
For Macintosh
®
See page 56
For Windows
®
See page 43
For Macintosh
®
See page 63
Installing drivers and software (See the Quick Setup Guide)