Filter
Top Products
Wireless configuration for Windows
®
using the Brother installer application
46
4
m Click Finish.
You have completed the wireless network setup. If you would like to continue installing drivers and
software necessary for operating your device, please choose Install MFL-Pro Suite from the
CD-ROM menu.
LCD messages when using the SES/WPS/AOSS control panel menu
LCD shows Connection status Action
Setting WLAN
Searching or accessing the access
point, and downloading settings from the
access point
—
Connecting SES
Connecting WPS
Connecting AOSS
Connecting the access point —
Connected Connection succeeded. —
Incorrect Mode Session overlap is detected.
Check that only one router or access point has
the Wi-Fi Protected Setup™ mode or AOSS™
mode enabled and try starting from c again.
Connection NG
Connection error
Connection failed. 1 Try starting c again.
2 If the same message continues, reset the
machine back to the factory settings and try
again.
(If it is shown after
the LCD shows
Setting WLAN.)
Connection failed.
Session overlap is
detected.
Check that only one router or access point has
the SecureEasySetup™ mode, Wi-Fi Protected
Setup™ mode or AOSS™ mode enabled and try
starting from c again.