Filter
Top Products
Wireless configuration for Macintosh
®
using the Brother installer application
67
5
Configuration in Ad-hoc mode 5
Before configuring the wireless settings 5
IMPORTANT
• If you have previously configured the wireless settings of the machine, you must reset the network LAN
settings before you can configure the wireless settings again. Press Menu, 5, 0 for Factory Reset,
Reset and choose Yes to accept the change. The machine will restart automatically.
• If you are using personal Firewall software, disable it. Once you are sure that you can print, restart your
personal Firewall software.
Configure the wireless settings 5
a Plug the machine’s power cord into the AC power outlet. Turn on the machine’s power switch.
b Press Menu, 5, 2, 7. Using a or b, choose On and press OK.
WLAN Enable
On
c Turn on your Macintosh
®
.
d Put the supplied CD-ROM into your CD-ROM drive. Double-click the MFL-Pro Suite icon on your
desktop.
e Double-click the Utilities icon.