Filter
Top Products
Configuring your machine for a wireless network
30
3
g If the following message appears, press 1 to choose On. The wired network interface will become
inactive with this setting.
WLAN Enable ?
1.On 2.Off
h The machine will search for your network and display a list of available SSIDs. You should see the SSID
you wrote down earlier. If the machine finds more than one network use a or b key to choose your
network, then press OK. Go to l.
If your access point is set to not broadcast the SSID, you will have to manually add the SSID name.
Go to i.
i Choose <New SSID> using a or b.
Press OK. Go to j.
Select SSID&Set
<New SSID>
j Enter a new SSID. (For information how to type text, see Entering Text on page 140.)
Press OK.
SSID:
k Press a or b to choose Infrastructure.
Press OK. Go to l
If you chose Ad-hoc, go to m.
Mode Select
Infrastructure
l Choose the Authentication method using a or b, and press OK.
Auth. Select
Open System
If you chose Open System, go to m.
If you chose Shared Key, go to n.
If you chose WPA/WPA2-PSK, go to q.
If you chose LEAP, go to r.
m Choose the Encryption type, None or WEP using a or b, and press OK.
Encryption Type?
None
If you chose None, go to t.
If you chose WEP, go to n.
n Choose the key option; KEY1, KEY2, KEY3, KEY4 using a or b, and press OK.
Set WEP KEY
KEY1:
If you chose the key which shows **********, go to o.
If you chose a blank key, go to p.