Filter
Top Products
Port Assignment Configuration Screen
802.1Q VLAN User’s Guide 3-15
Field Definitions
3.5.1 Changing the Port Mode
To change the operational mode of a port, proceed as follows.
1. Use the arrow keys to highlight the PORT MODE field for the
module and port combination you wish to change.
2. Use the SPACE bar or BACKSPACE key to step through the available
selections. A port may be configured for any of the following modes:
• HYBRID – This is the default mode for all ports on the switch.
The initial Port VLAN List includes the PVID with a frame format
of untagged. Any other VLANs desired for the Port VLAN List
need to be manually configured. By changing the default mode to
1Q Trunk or 1D Trunk, the Port VLAN List and the associated
frame type are automatically configured.
Table 3-3 Port Assignment Configuration Screen Field Definitions
Use this field … To …
Port
(Read-Only)
See the port numbers of the interfaces of the current
module.
Port Mode
(Selectable)
Display the current operational mode for the
corresponding port and select one of three modes:
HYBRID, 1Q TRUNK, or ID TRUNK. The default is
HYBRID.
VLAN ID
(Selectable)
Select the ID number of the VLAN that is associated with
the current port (Port VLAN ID). This is the VLAN ID into
which any untagged frame will be classified. The default
PVID is 0001.
FID (Read-Only) Display the FID associated with the VLAN ID. This field
updates as the associated VLAN ID field is changed.
VLAN Name
(Read-Only)
Display the name that is associated with the current
VLAN ID. If a name was not assigned to a VLAN, “NOT
DEFINED” displays as the VLAN name.