Filter
Top Products
Chapter 3: VLAN Configuration
3-26 802.1Q VLAN User’s Guide
Field Definitions
Table 3-6 Protocol VLAN Configuration Screen Field Definitions
Use this field … To …
VLAN ID -
upper
part of screen
(Selectable)
Display the VLAN IDs currently configured and may be
selected after the screen is saved to call up the Protocol
Ports Configuration screen using the ENTER key.
Protocol Type -
upper part of
screen
(Selectable)
Display the protocol type associated with the VLAN ID in
the VLAN ID column. This field may be selected after the
screen is saved to call up the Protocol Ports Configuration
screen.
Configured
Ports
(Selectable)
Indicate if a VLAN ID and Protocol Type applies to all
configurable ports or only those listed in the Protocol
Ports Configuration screen for that Priority and Protocol
Type. Configurable ports are all the physical ports and
existing virtual interfaces (such as for ATM).
VLAN ID
(Modifiable)
Enter the VLAN ID which will be assigned to a protocol.
The VLAN ID may be one already created or a new one. If
a new VLAN ID is entered, it will be added to the VLAN
Configuration with a FID of the same value as the VLAN
ID and a VLAN name of PROTOCOL VLAN. To enter the
VLAN IDs, refer to Section 3.8.2.
Configure Ports
(Toggle)
Apply the priority and protocol type to all or none of the
configurable ports. The choices are:
ALL PORTS
NO PORTS
NOTE: If ports are added or removed from the port list in
the Priority Ports Configuration screen described in
Section 3.9, the Configured Ports for the particular VLAN
ID and Protocol Type will change from ALL PORTS or NO
PORTS to USER DEFINED PORT LIST in the Protocol
Priority Configuration screen