Filter
Top Products
1-16
Introduction
Figure 1-6 shows two Ethernet segments that take advantage of the
virtual workgroup feature of the SmartSTACK 100 ELS100-16TX
and the increased bandwidth applied to each A and B host.
Figure 1-6. Using the SmartSTACK 100 ELS100-16TX to Create Virtual
Workgroups to Help Optimize Bandwidth
A host from workgroup A can limit a broadcast to all hosts within
workgroup A and prevent the broadcast from going across the
network and adding to the amount of contention for the limited
100 Mbps bandwidth.
Ports that are not part of a workgroup will receive and transmit
packets from any ports. However, if you configure the
SmartSTACK 100 ELS100-16TX with workgroup A and B, as
shown in Figure 1-6, broadcast traffic from workgroup A ports will
not be seen on workgroup B ports, and vice versa.
PWR
CPU
RESET
COM
PORT STATUS MODE
TXACTFDX MON
RXCOL100 USR
STATUS
ELS100-16TX
EPIM100
EPIM100
10X 12X 14X 16X
9X 11X 13X 15X
2X 4X 6X 8x
1X 3X 5X 7X
LINK
STATUS
LINK
STATUS
246810121416
135
7
9111315
ELS100-16TX
Router
A
A
A
B
B
B
AB
Workgroup A
Workgroup B
A
A
B
B