Filter
Top Products
3-12
Configuring Your ELS100-16TX
The display could look like the following:
The following conditions can be displayed:
• Broken — Trunking is enabled, but the port in non-operational.
• Closed (or Oneway) — Trunking is enabled, and the Trunking
Protocol is attempting to establish a trunk connection.
• Helddown — Trunking is enabled, but the trunk connection was
rejected. After a short time-out period, another attempt is
automatically initiated to establish a good trunk connection.
• Joined — Trunking is enabled, and the Trunking Protocol has
established a good trunk connection.
• Off — Trunking is not enabled.
Port 1 Status
ELS100-16 > status 1
Type/Speed: 10B-TPX/10Mbits
Port Mirroring: No
Duplex Mode: Half Duplex
Bridging: Transparent Bridging
Enabled/Disabled: Enabled, Rip listening
Spanning Tree: Forwarding
Trunking State: Off
Pkts Transmitted: 1693
Pkts Received: 0
Carrier Losses: 1693
Total Collisions: 0
Excess Collisions: 0
RX Missed pkts: 0
RX Runt pkts: 0
RX FCS/Align Errs: 0
Internal TX Errs: 0
Type <CR> to display port 2 status...>