Filter
Top Products
Configuring Your ELS100-16TX
3-11
3.7 DISPLAYING TRUNKING STATUS
To check the status of your current trunking configuration, at the
LCM prompt:
1. Type
trunk <PORT-RANGE>
The display could look like the following:
Note: IP Addresses are not required for trunking to function.
To check the status for ports configured for trunking, at the LCM
prompt:
1. Type
status <PORT-RANGE>
ELS100-16 > trunk 2-4
Port 2 trunking joined to Bridge MAC Addr 00:40:27:00:06:1f IP Addr 192.138.217.1
Port 3 trunking joined to Bridge MAC Addr 00:40:27:00:06:c3 IP Addr 192.138.200.2
Port 4 trunking joined to Bridge MAC Addr 00:50:36:00:07:4a IP Addr 192.140.250.7