Cabletron Systems 100 Switch User Manual


 
3-14
Configuring Your ELS100-16TX
3.10 DISPLAYING MIRRORING STATUS
To check the status of your current mirroring configuration, at the
LCM prompt:
1. Type
mirror <PORT>
The display could look like the following:
Note: The
mirror command will display the status of all ports, even if a
specific port or range or ports is entered with the command.
ELS100-16> mirror 2
Port Mirroring: Port 1 is mirroring Tx traffic
.
.
.
Port 16 mirroring off