Introduction
1-19
1.6.2 Basic LCM Commands
If you are going to manage the SmartSTACK 100 ELS100-16TX
using LCM, you first must connect the SmartSTACK 100
ELS100-16TX to an ASCII terminal or terminal emulator. See
Section 2.5, Connecting the Local Console Manager, for
instructions.
When you want to use LCM, begin by pressing the Enter key
several times to get the LCM prompt (
ELS100-16TX >).
Help
Displays the menu of available commands. Help can also be
displayed by typing a question mark (?). The output from the
help
command is displayed follows.