Filter
Top Products
Configuring Your ELS100-16TX
3-9
Figure 3-2. Trunk Groups
To enable trunking for the example shown, perform the following:
1. Connect the desired ports of the ELS100-16TXs together using
100BASE-T crossover cables.
If ELS100-16TX A is handling only a small number of users,
the A to B Trunk Group could have just two ports per ELS100-
16TX. If ELS100-16TX B and C are expected to interconnect
many users, you could use up to eight ports in the B to C
Trunk Group.
2. Using LCM or an NMS, turn on trunking for the connected
ports on each ELS100-16TX.
For ELS100-16TX A, at the LCM prompt:
a. Type
trunk 2,3 on
PWR
CPU
RESET
COM
PORT STATUS MODE
TXACTFDXMON
RXCOL100USR
STATUS
ELS100-16TX
EPIM100
EPIM100
10X 12X 14X 16X
9X 11X 13X 15X
2X 4X 6X 8x
1X 3X 5X 7X
LINK
STATUS
LINK
STATUS
246810 1214 16
135
7
9111315
PWR
CPU
RESET
COM
PORT STATUS MODE
TXACTFDXMON
RXCOL100USR
STATUS
ELS100-16TX
EPIM100
EPIM100
10X 12X 14X 16X
9X 11X 13X 15X
2X 4X 6X 8x
1X 3X 5X 7X
LINK
STATUS
LINK
STATUS
246810 1214 16
135
7
9111315
PWR
CPU
RESET
COM
PORT STATUS MODE
TXACTFDXMON
RXCOL100USR
STATUS
ELS100-16TX
EPIM100
EPIM100
10X 12X 14X 16X
9X 11X 13X 15X
2X 4X 6X 8x
1X 3X 5X 7X
LINK
STATUS
LINK
STATUS
246810 1214 16
135
7
9111315
Trunk Group #1
ELS100-16TX A
Trunk Group #2
ELS100-16TX C
ELS100-16TX B