Filter
Top Products
1-20
Introduction
ELS100-16 > help
ELS100-16TX Local Console Manager
help or ? this menu
status [PORT-RANGE] to display unit or port status
baud [BAUD-RATE] to change the console baud rate
exit or logout to logout
erase to erase configuration information
ident to display unit identification
ipaddr [PORT# IPADDR [MASK]] to set or display IP addresses
addresses display [any] [ADDR [MASK]] to display learned addresses
bridge [PORT-RANGE [OPTIONS]] to set bridging methods
clearstats to clear all port statistics
trunk [PORT-RANGE [{on|off}]] to set or display trunking status
enable [PORT-RANGE [noRIP]] to enable a set of ports
disable [PORT-RANGE] to disable a set of ports
community to change the password/community name
sttimer [TIMER-VALUE] to set or display st age timer
workgroup [NAME [delete|PORT-RANGE [INFO]]] to set or display workgroups
speed [PORT-RANGE [{auto|10|100}]] to set or display speed
duplex [PORT-RANGE [{auto|half|full}]] to set or display duplex mode
mirror [PORT# {Rx|Tx|both|off}] to set or display port mirroring
time [SystemTime (HHMMSS)] to set or display the system time
date [SystemDate (MMDDYYYY)] to set or display the system date
reboot (SECONDS|off) to reboot the unit after seconds
arp display to display the arp table
route display [IPADDR] to display routing table information
ping [-rvsx] HOST [DATASIZE [COUNT]] to send ICMP ECHO_REQUEST pkts to tgt
traplog to display the most recent SNMP traps
ELS100-16 >