Filter
Top Products
Monitoring and Managing Your ELS100-16TX
4-7
To display all MAC addresses, at the LCM prompt:
1. Type addresses display any
LCM responds with a list of all MAC addresses, their
associated ports, the type, age, and number of frames from and
to that address.
If you do not specify
any, only the learned addresses are displayed.
To display a specific address, at the LCM prompt:
1. Type
addresses display <MAC-ADDRESS>
For example, if you typed, addresses display
02:04:06:03:2a:43
, LCM would display the following
information:
You can display a range of addresses by using a net mask. This is
helpful when determining the status associated with stations
containing the same make of Ethernet network interface cards. At
the LCM prompt:
1. Type
addresses display <MAC-ADDRESS> <NET-MASK>
For example, to see all addresses that begin with 02:04:06, you
would enter:
addresses display 02:04:06:00:00:00 ff:ff:ff:00:00:00
Address Type Port
Age(secs)
08:00:20:02:3a:44 Learned 3 26
Enter <CR> to continue, Ctrl-C to exit:
Address Type Port
Age(secs)
02:04:06:03:2a:43 Learned 5
21