Filter
Top Products
Configuring Your ELS100-16TX
3-15
To check the status for ports configured for mirroring:
1. Type status <PORT>
The display could look like the following:
The following conditions can be displayed:
• Rx only — mirroring is enabled, but mirroring only packets
received by the port.
• Tx only — mirroring is enabled, but mirroring only packets
transmitted by the port.
• Rx and Tx — mirroring is enabled, mirroring both transmit and
receive packets.
• No — mirroring is not enabled.
Port 1 Status
ELS100-16 > status 1
Type/Speed: 100B-TX/100Mbits
Port Mirroring: No
Duplex Mode: Half Duplex
Bridging: Transparent Bridging
Enabled/Disabled: Enabled, Rip listening
Spanning Tree: Forwarding
Trunking State: Off
Pkts Transmitted: 1693
Pkts Received: 0
Carrier Losses: 1693
Total Collisions: 0
Excess Collisions: 0
RX Missed pkts: 0
RX Runt pkts: 0
RX FCS/Align Errs: 0
Internal TX Errs: 0
Type <CR> to display port 2 status...>