Filter
Top Products
4-8
Monitoring and Managing Your ELS100-16TX
LCM would display:
The
ipaddr command displays the IP addresses, subnet masks, and
MAC addresses of all ELS100-16TX ports. At the LCM prompt:
1. Type
ipaddr
LCM displays the current IP address table, for example.
4.3.3 Displaying Manufacturing Information
The ident command identifies ELS100-16TX manufacturing
information, including the part number and any power-up test
codes and diagnostic data. To display the manufacturing
information, at the LCM prompt:
1. Type
ident
LCM displays the following type of information:
Address Type Port
Age(secs)
02:04:06:03:2a:43
02:04:06:00:2a:67
02:04:06:a3:70:2b
Learned
Learned
Learned
5
4
6
21
1
0
Enter <CR> to continue, Ctrl-C to exit:
IP Address
Address Mask
MAC Address
1
2
3
4
5
6
7
8
192.138.217.1
0.0.0.0
192.138.217.10
0.0.0.0
0.0.0.0
192.138.217.20
192.138.217.50
192.138.217.30
255.255.255.0
255.0.0.0
255.255.255.0
255.0.0.0
255.0.0.0
255.255.255.0
255.255.255.0
255.255.255.0
00:40:27:00:06:1f
00:40:27:00:06:c3
00:40:27:00:06:3e
00:40:27:00:03:7a
00:40:27:00:05:c7
00:40:27:00:04:4a
00:40:27:00:06:9e
00:40:27:00:04:b4
Port
Part Number:
Power-up test codes:
Diagnostic data:
00000000 ff006000 00000000
501-3000-002
00000000 00000000 00000000 00000000
00000000 00000000 fffffffc fffffffc 00000000
X70002e4-0006891
Up-Link Module Part Number: 123-4567-891 X1234567-1234567