Cabletron Systems 100 Switch User Manual


 
4-2
Monitoring and Managing Your ELS100-16TX
ELS100-16TX statistics are divided into four groups:
System statistics
Ethernet port statistics
Traffic analysis statistics
SNMP statistics
You can use this information to analyze your overall network
performance and to make configuration changes as necessary. For
example, Ethernet port statistics can help you identify network
devices that require high bandwidth, and therefore should be
connected through a dedicated, rather than a shared, network
connection. In addition, Ethernet port statistics can help you
identify a network device that is the source of numerous multicast
packets due to a possible malfunction.
4.2.1 Gathering Statistics
For purposes of network management, managed objects must be
identified. Creation of a managed object is achieved by placing its
identifier, and a set of management information appropriate to its
class, in the Management Information Database (MIB).
Using the MIB variables, you can obtain a detailed analysis of your
network by combining statistics for each source network,
destination network, and source and destination port. The
ELS100-16TX Release Notes contain information on where to find
the SNMP MIB variables you need to monitor and manage the
ELS100-16TX.
4.2.2 System Statistics
For each ELS100-16TX, the following system statistics are
available:
The number of seconds since the ELS100-16TX was last reset.