Routine Cleaning
Your machine requires little periodic maintenance. This section describes the
necessary cleaning procedures for your machine.
• When cleaning the machine’s exterior or the platen glass, be sure to
disconnect the power cord before cleaning the machine.
• For the imageRUNNER 1670F, print any received faxes stored in memory
before disconnecting the power cord, because documents in memory are
backed up only for about two hours when the power cord is disconnected.
(See Chapter 5, “Special Sending and Receiving Features,” in the Facsimile
Guide for details.)
• Use a soft cloth to avoid scratching the components. Do not use tissue paper,
paper towels, or similar materials for cleaning; they can stick to the
components or generate static charges.
• Do not use volatile liquids such as thinner, benzene, acetone, or any other
chemical cleaner to clean the interior of the machine; these can damage the
machine’s components.
Cleaning the Exterior
Wipe the machine’s exterior with a clean, soft, lint free cloth moistened with water
or diluted dishwashing detergent solution.
5-14 Routine Cleaning
5
Routine Maintenance
CAUTION
**RG_Chap 05 3/4/04 7:45 PM Page 14