Filter
Top Products
Settings from a PC
10-4
Starting the Remote UI
Starting the Remote UI
To start the Remote UI, follow the procedure described below.
1
Prepare the Network.
Set up the machine for use in a network, then
connect the machine and the computer to your
network router or a hub.
For details, see “Setup Computers and Software,”
in the Starter Guide.
2
Start the web browser.
3
Enter the IP address of the machine in
[Address] or [Location], then press [Enter]
on the keyboard.
For details on how to check the IP address, see
“Setting and Checking the IP Address,” in the e-
Manual.
The Remote UI screen appears.
4
Enter the required data.
The required data dier depending on the
authentication mode you are using.
■In case of default settings:
①
Select [System Manager Mode] or [End-User
Mode].