Filter
Top Products
8-8
Maintenance
Checking the Toner Level
Keys to be used for this operation
OK
Status Monitor/Cancel
1 Press [ ] (Status Monitor/Cancel).
2 Press [ ] or [ ] to select <Device Status>, and
then press[OK].
Status Monitor/Cancel
Device Status
Copy Job Status
Fax Job Status/Hist
...
Print Job Status
3 Press [ ] or [ ] to select <Toner Gauge>, and
then press[OK].
Device Status
Paper Information
Toner Gauge
Check Counter
The toner level is displayed.
Toner Gauge
OK
NOTE
Displaying the toner level
The toner level is displayed in three stages.
• <OK>
• <Low>
The message <Prepare toner cartridge.> appears in the display.
• <Nearly Out>
The message <Toner is nearly out.> appears in the display.
For details on solution, see the following.
e-Manual Troubleshooting Display Messages
4 Press [ ] (Status Monitor/Cancel) to close
<Toner Gauge> screen.
Using the Toner Saver Mode
Set whether or not to conserve toner when copying or faxing.
NOTE
If you want to conserve toner when printing
Set to use [Toner Save] on the [Quality] tab of the printer driver.
e-Manual Print Printing Functions [Quality] Sheet
Keys to be used for this operation
Menu
OK
1 Press [ ] (Menu).
2 Press [ ] or [ ] to select <Preferences>, and
then press [OK].
Menu
Preferences
Timer Settings
Copy Settings
Fax TX Settings
3 Press [ ] or [ ] to select <Toner Saver Mode>,
and then press [OK].
Preferences
Sound Volume Control
Display Settings
Toner Saver Mode
Paper Feed Method Sw
...
4 Press [ ] or [ ] to apply the toner saver mode to
an operation, and then press [OK].
Toner Saver Mode
Copy
Fax
5 Press [ ] or [ ] to select <Off> or <On>, and
then press [OK].
Copy
Off
On