Filter
Top Products
System Configuration
3-3
3
Optional Equipment
a Copy Tray-L1
The Copy Tray-L1 is equipped with the following
features: Collate, Group, and Rotate.
b Card Reader-C1
The Card Reader-C1 enables Department ID
Management to be performed with the control
cards.
c Paper Deck-AD1/Paper Deck-AE1
The Paper Deck-AD1/Paper Deck-AE1 provides
an additional source of paper for printing jobs.
The Paper Deck-AD1/Paper Deck-AE1 holds up
to 3,500 sheets of paper (20 lb bond (80 g/m
2
)).
d Document Insertion/Folding Unit-F1/
Document Insertion Unit-E1
If the Document Insertion/Folding Unit-F1 or
Document Insertion Unit-E1 is attached to an
optional finisher, you can insert covers into
documents. If the Document Insertion/Folding
Unit-F1 is attached, you can also perform
C-folding and Z-folding.
e Puncher Unit-AT1
The Puncher Unit-AT1 is equipped with the Hole
Punch mode. The Puncher Unit-AT1 can be
attached only if the optional Finisher-AD1 or
Saddle Finisher-AD2 is attached.
f Staple Cartridge-D2
The Staple Cartridge-D2 can be attached to the
optional Saddle Finisher-AD2 for saddle
stitching.
g Staple-J1
The Staple-J1 can be attached to the optional
finisher for stapling (Corner and Double).
h Saddle Finisher-AD2
The Saddle Finisher-AD2 is equipped with the
following features: Collate, Group, Offset, and
Staple (Corner, Double, and Saddle Stitch).
i Finisher-AD1
The Finisher-AD1 is equipped with the following
features: Collate, Group, Offset, and Staple
(Corner and Double).
NOTE
•
Only one optional finisher can be attached to the main unit at a time.
•
The Copy Tray-L1 can be attached to the machine only if no optional finisher is attached.