Filter
Top Products
Specifying Common Settings
4-34
4
Customizing Settings
2
Select the paper source in which you want to register the
paper type.
The numbers on the screen represent the following paper sources:
The optional Saddle Finisher-AD2, Puncher Unit-AT1, and Paper Deck-AD1 are
attached.
3
Select the desired paper type loaded in the paper source ➞
press [OK].
If you want to select a paper type that is not in the list, press [Detailed Settings] ➞
select the desired paper type ➞ press [OK].
Make sure that the registered paper type setting is the same paper type that is
loaded in the paper source.
● If you want to register tab paper:
❑
Press [Tab Paper].
[Tab Paper] is displayed when Paper Drawer 3 or 4 is selected.
❑ Press [-] or [+] to set the number of tabs ➞ press [Done].
You can load tab paper with up to 10 tabs.
Paper Drawer 1
Paper Drawer 2
Paper Drawer 3
Paper Drawer 4
Paper Deck-AD1 (optional)