Filter
Top Products
List of Error Messages
8-91
8
Troubleshooting
Cause 2 The machine's memory is full.
Remedy Erase unnecessary documents and documents with errors from memory to
increase the amount of available memory. (See Chapter 2, "Introduction to the
Mail Box Functions," in the Copying and Mail Box Guide, and Chapter 6,
"Receiving Documents," in the Sending and Facsimile Guide.)
Cause 3 The scanned document cannot be stored because there are more than 2,000
documents in the specified inbox.
Remedy If there are a large number of documents, delete the unnecessary ones from
the specified inbox. (See Chapter 2, "Introduction to the Mail Box Functions" in
the Copying and Mail Box Guide.)
# 852
Cause An error occurred because the main power switch was turned OFF while a job
was being processed.
Remedy Check to see if the main power switch is turned ON. Try processing the job
again, if necessary. (See "Main Power and Control Panel Power," on p. 1-16.)
# 853
Cause 1 When trying to print a large number of pages, the job is not performed due to
insufficient memory resources.
Remedy Reduce the number of pages to print, or perform the print job again when no
other jobs are reserved.
Cause 2 The job could not be processed, because it was canceled from the printer driver
while the print data was being sent to the machine.
Remedy Try printing again.
Cause 3 The spool memory is full when Use Spooler in Network Settings in System
Settings (from the Additional Functions screen) is set to 'On', therefore, data
received from the host could not be spooled.
Remedy Set Use Spooler in Network Settings in System Settings (from the Additional
Functions screen) to 'Off', and try sending the print data again. (See Chapter 3,
"Using a TCP/IP Network," in the Network Guide.)
Cause 4 The maximum amount of data that can be received has been exceeded. (See
Chapter 6, "Receiving Documents," in the Sending and Facsimile Guide.)
Remedy Try printing the documents again after all current jobs are complete. If you still
cannot print, check the sent data.