Filter
Top Products
List of Error Messages
8-88
8
Troubleshooting
# 099
Cause Copying/printing was interrupted.
Remedy Try copying/printing again.
# 701
Cause 1 The specified Department ID does not exist, or the password has changed.
Remedy Enter the correct Department ID or password using - (numeric keys) on
the control panel, and try again.
Cause 2 The Department ID or password was changed while the machine was
processing a job.
Remedy Change the Department ID and password, and try again. If you do not know the
password, contact your System Manager.
Cause 3 <Allow Printer Jobs with Unknown IDs> is set to 'Off'.
Remedy Set <Allow Printer Jobs with Unknown IDs> is set to 'On'. (See "Accepting Print
and Scan Jobs with Unknown IDs," on p. 6-16.)
# 703
Cause The hard disk is full, and no more images can be scanned.
Remedy 1 Wait a few moments, and try scanning again after the current send jobs
complete.
Remedy 2 Erase documents stored in inboxes. If the machine still does not operate
normally, turn the main power OFF, and then back ON. (See "Main Power and
Control Panel Power," on p. 1-16.)
# 711
Cause The inbox memory is full.
Remedy Erase unnecessary documents stored in the inbox. (See Chapter 2,
"Introduction to the Mail Box Functions," in the Copying and Mail Box Guide,
and Chapter 6, "Receiving Documents," in the Sending and Facsimile Guide.)