Filter
Top Products
Parts and Their Functions
1-11
1
Before You Start Using This Machine
a Feeder
Originals placed in the feeder are automatically
fed sheet by sheet to the platen glass for
scanning. You can select to scan originals as
two-sided documents with or without being
turned over. (See "Feeder Parts and Functions,"
on p. 1-13.)
b Control Panel
Includes the keys, touch panel display, and
indicators required for operating the machine.
(See "Control Panel Parts and Functions," on p.
1-14.)
c Stack Bypass
Use the stack bypass to feed paper manually
and for loading nonstandard paper stock. (See
"Making Prints Using the Stack Bypass," on p.
2-42.)
d Main Unit's Upper Right Cover
Open this cover when clearing a paper jam
inside the main unit. (See "Inside the Upper and
Lower Right Covers," on p. 8-23.)
e Main Power Switch
Press to the "I" side to turn the main power ON.
(See "Main Power and Control Panel Power," on
p. 1-16.)
f Main Unit's Lower Right Cover
Open this cover when clearing a paper jam
inside the main unit. (See "Inside the Upper and
Lower Right Covers," on p. 8-23.)
g Paper Drawers 3 and 4
Holds up to 550 sheets of paper (20 lb bond (80
g/m
2
)).
h Paper Drawers 1 and 2
Holds up to 1,500 sheets of paper (20 lb bond
(80 g/m
2
)).
NOTE
For more information on the optional equipment that can be attached to the machine, see
Chapter 3, "Optional Equipment."
The optional Copy Tray-L1 is
attached.
The optional Saddle Finisher-AD2, Puncher
Unit-AT1, Document Insertion/Folding
Unit-F1, and Paper Deck-AE1 are attached.