Filter
Top Products
Making Prints Using the Stack Bypass
2-43
2
Basic Operations
NOTE
•
When scanning the following originals, you cannot use the Automatic Paper Selection
mode. Use the Manual Paper Selection mode when scanning these types of originals:
- Highly transparent originals, such as transparencies
- Originals with an extremely dark background
•
For high-quality printouts, use paper recommended by Canon.
■ Standard Size
You can select standard inch paper, or A or B series paper.
■ Free Size
You can load nonstandard paper sizes (3 7/8" x 5 7/8" to 11 5/8" x 17"
(99 mm x 148 mm to 297 mm x 432 mm)).
1
Open the stack bypass.
NOTE
If the paper size you are going to load into the stack bypass is different from the
paper size stored in Stack Bypass Standard Settings, set Stack Bypass Standard
Settings to 'Off' in Common Settings (from the Additional Functions screen). (See
"Standard Paper for the Stack Bypass," on p. 4-46.)
● If the paper you want to specify is already loaded in the stack
bypass:
❑
Press [Paper Select] ➞ [Stack Bypass] ➞ select the paper size and type loaded
in the stack bypass ➞ proceed to step 6.