Filter
Top Products
Placing Originals
2-39
2
Basic Operations
Feeder
Place the originals into the feeder when you want to copy several originals at the
same time, and press (Start). The machine automatically feeds the originals to
the platen glass and scans them. If you are using the imageRUNNER 5075/5065/
5055, you can select to scan originals as two-sided documents with or without
being turned over. If you are using the imageRUNNER 5050, the feeder
automatically turns over two-sided originals to make one or two-sided copies.
• Weight:
- One-sided scanning: 11 to 32 lb bond (42 to 128 g/m
2
)
- Two-sided scanning: 13 to 32 lb bond (50 to 128 g/m
2
)
• Size: 11" x 17", LGL, LTR, LTRR, STMT, or STMTR
• Tray Capacity: up to 100 sheets (20 lb bond (80 g/m
2
))
IMPORTANT
•
Thin originals may become creased, if used in a high temperature or high humidity
environment.
•
Do not place the following types of originals into the feeder:
- Originals with tears or large binding holes
- Severely curled originals or originals with sharp folds
- Clipped or stapled originals
- Carbon backed paper or other originals which may not feed smoothly
- Transparencies and other highly transparent originals
- Originals with a special shape, such as tab paper
•
If the same original is fed through the feeder repeatedly, the original may fold or become
creased, and make feeding impossible. Limit repeated feeding to a maximum of 30 times
(this number varies, depending on the type and quality of the original).
•
If the feeder rollers are dirty from scanning originals written in pencil, perform the feeder
cleaning procedure. (See "Routine Cleaning," on p. 7-50.)
•
Always smooth out any folds in your originals before placing them into the feeder.
1
Adjust the slide guides to fit the size of your originals.