Filter
Top Products
Timer Settings
4-57
4
Customizing Settings
Auto Clear Time
If the machine is idle for a certain period of time (after the last print job or key
operation is performed), the display returns to the Basic Features screen (standard
settings) of the selected function. This period of time is called the "Auto Clear
Time."
NOTE
If '0' is selected, the Auto Clear Time mode is not set.
1
Press (Additional Functions) ➞ [Timer Settings] ➞ [Auto
Clear Time].
2
Press [-] or [+] to enter the desired Auto Clear Time ➞
press [OK].
Time Until the Unit Quiets Down
If the machine is not in use (no keys are pressed, and no print jobs are being
processed) for a certain period of time, the machine enters the Quiet mode. While
in the Quiet mode, sounds emanating from the machine are reduced. You can
specify the amount of time that must elapse before the machine enters the Quiet
mode in one minute increments.
NOTE
If '0' is selected, the Quiet mode is not set.
1
Press (Additional Functions) ➞ [Timer Settings] ➞
[Time Until Unit Quiets Down].
2
Press [-] or [+] to specify the desired time period ➞
press [OK].