Filter
Top Products
• Press F2 to Enter Setup
• Use up Arrow Key to Go to Top Toolbar
• Use Right Arrow Key to Go to Advanced
• Hit Enter on Advanced
• 3rd Item is Parallel Port Mode
• Use Plus Key to Change From Compatible to Bi-directional
• Hit Escape to Go to Main Menu
• Select Save Changes and Exit
• Notice Changes and Have Been Saved (continue)
• Reboot Press F 1
• Select Advanced Setup
• Select Peripheral Configuration
• Cursor to Parallel Port Mode
• Press Enter
• Select "ECP"
• Press F10 to Save and Exit
• Press Fl to Enter Setup
• Cursor Over to Peripheral Configuration
• Hit Enter
• Cursor Down to Parallel Port Mode and Hit Enter
• Select ECP-EPP Mode
• Hit Enter
• Press Escape
• Press F10 to Save and Exit
• Select "Save Settings and Exit"
• Hit Enter
• After Rebooting, Press DEL to Enter Setup
• Cursor Down to Chipset Features and Hit Enter
• Cursor Down to Onboard Parallel Mode
• Use PageUp key to Select ECP Mode
• Press Escape
• Press F10 to Save Settings and Exit
• Press "Y" for Yes
• Hit Enter