Filter
Top Products
Troubleshooting
8
6-8
correct, stop the print job, select the correct setting, then start the print job
again. (ÆP.2-7)
Problem 2: Print media is curled or creased.
Solution: Remove the creasing or curling then start the print job again.
Black or White Streaks Visible.
Problem 1: Printhead is out of alignment.
Solution: When printing on plain paper, use the printer operation panel to perform
band adjustment with the “Band Adjust” item. (ÆP.6-29)
Problem 2: The amount of paper feed from the paper cassette that fed is incorrect.
Solution: On the operation panel, change the “LF Adjust” setting, then print the
image that produced the white lines. Check the printout, then fine adjust
the amount of feed. Adjust the amount of feed for each paper cassette.
(ÆP.4-8, P.4-11)
00_J80xUG_Eng.book Page 8 Friday, April 12, 2002 12:28 AM