Filter
Top Products
Ans. Machine Mode
Use Ans. Machine Mode if you have an answering machine connected to the fax. By setting this mode,
you can receive documents automatically, and messages from people calling when you are out.
See p. 15 for details on connecting an answering machine to your fax.
j Recording the outgoing message
When recording a message...
¶ Try to keep your message to less than 15 seconds long.
¶ In the message tell your callers how to send a fax.
¶ Here’s a sample message:
¶ ″Hello. I’m not in the office right now, but please leave a message after the beep. I’ll return your call
as soon as possible. If you would like to send a fax, press the start button on your fax after recording
your message. Thank you.″
¶ Leave a 4-second pause at the beginning of the message (this pause plus the outgoing message should
not exceed 15 seconds).
¶ Set the answering machine to answer on the first or second ring.
j Setting Ans. Machine Mode
Set Ans. Machine Mode when you have an answering machine connected to your fax, and you are
going out.
1
Press [RECEIVE MODE] until ″Ans. Machine
Mode″appears on the LCD display.
2
Press [START/COPY].
When this mode is set, the LCD will display the
time and ″AnsMode″.
j Receiving documents and messages in Ans. Machine Mode
When the fax is set to Ans. Machine Mode, it automatically receives documents, or leaves messages on
your answering machine when you are out.
1
Make sure you have connected an answering
machine to your fax. See p. 15.
2
Make sure the fax is set to ″AnsMode″ (see
above).
Ans. Machine Mode
RECEIVE MODE
12:00 AnsMode
START/COPY
SETTING UP TO RECEIVE FAXES
11111111111111111111111111111111111111111111
21