Filter
Top Products
Name Description Settings
TEL LINE TYPE* Set the dialling method the fax uses to match the type of
phone line you have.
TOUCH TONE/ROTARY PULSE**
PSTN/PBX SET Sets the type of the PBX through which your fax is
connected.
PSTN/PBX
PSTN Your fax is connected to the outside line.
PBX Your fax is connected through a PBX.
You can set the type of the PBX among PREFIX, HOOKING
and EARTH CONNECTION. If you select PREFIX, you can
set the number up to 19-digits that will access the outside
line.
If set to PBX, the [05] button cannot be used for One-touch
Speed Dialling.
M-KEY SETTING (UK
only)
Enable/disable the M-key setting. When set to ON, the [10]
button cannot be used for One-touch Speed Dialling.
ON/OFF
Set an access code and ID code for the 2300 service of
Mercury Communications Limited, p. 42.
ACCESS CODE Set an access code up to 19 digits.
-
ID CODE Set an ID code up to 19 digits.
-
*TEL LINE TYPE cannot be set in HongKong, Norway and Denmark.
**TOUCH TONE is the default setting in the UK and Singapore.
REPORT SETTINGS
Factory settings are in bold. For instructions on how to change a setting, refer to How to change a
setting, pp. 81, 82.
Name Description Settings
TX REPORT Enable/disable automatic printing of the transmission
report.
PRINT ERROR ONLY prints only when a transmission error
occurs.
OUTPUT YES sets the fax to print an activity report every
time you send a document.
OUTPUT NO turns off the activity report feature.
OUTPUT YES/OUTPUT NO/
PRINT ERROR ONLY
TX CONFIRM REP. When you set TX REPORT to OUTPUT YES or PRINT
ERROR ONLY, you can add to the TX report half of the first
page of the document that was being sent. This can help
remind you which document was being sent. Valid only for
memory transmissions.
OUTPUT YES/OUTPUT NO
RX REPORT Enable/disable automatic printing of the reception report.
PRINT ERROR ONLY prints only when an error occurs
during receiving.
OUTPUT YES sets the fax to print an activity report every
time you receive a document.
OUTPUT NO turns off the activity report feature.
OUTPUT YES/OUTPUT NO/
PRINT ERROR ONLY
ACTIVITY REPORT Enable/disable automatic printing of the activity report.
Unless you change the setting, your fax is set to print
anactivity management report for every 20 transactions
(sending and receiving).
OUTPUT YES/OUTPUT NO
TX/RX SEPARATE Divide the activity management report into sending and
receiving transactions.
ON/OFF
SETTINGS AND ACTIVITY REPORTS
84