Filter
Top Products
13-8 Troubleshooting Chapter 13
AUTO REDIAL
BUSY/NO SIGNAL
CHANGE CARTRIDGE
—
#018
—
The unit is waiting to
redial the other party’s
fax number because the
line was busy or the
other party did not
answer when you tried to
send the document.
The fax/telephone
number you dialled is
busy.
The fax number dialled
was incorrect.
The other party’s fax
machine is not working.
The other party is not
using a G3 fax machine.
The telephone line type
setting on your unit is
incorrect.
The receiving fax
machine did not answer
within 55 seconds (after
all automatic redialling
attempts).
The toner inside the
toner cartridge may be
unevenly distributed.
The toner cartridge is
empty.
Wait for the unit to
automatically redial the fax
number (1 p. 7-9).
Try sending the document
at a later time.
Check the fax number and
dial again.
Contact the other party and
have them check their fax
machine.
Contact the other party to
check that they are using a
G3 fax machine.
Set your unit for your
telephone line type
(1 p. 3-8).
Contact the other party and
have them check their fax
machine.You can try to
send the document using
manual sending via the
handset (1 p. 7-6). For an
overseas call, add pauses
to the registered number
(1 p. 9-2).
Redistribute the toner
inside the toner cartridge
(1 p. 12-7). If the message
remains, replace the toner
cartridge (1 p. 12-7).
Replace the toner cartridge
(1 p. 12-7).
Message Error Code Cause Action
LCD Messages
The following messages are displayed in the LCD when the FAX is performing a task,
or when it encounters an error. The error code appears in the ACTIVITY REPORT
(1 p. 11-3).