Filter
Top Products
Appendix C Country-specific Features C-7
Country-specific
Features
New Zealand
Caution
1. This equipment may not necessarily provide for the effective hand-over of a call to or
from a telephone connected to the same line.
2. The operation of this equipment on the same line as telephone or other equipment
with audible warning devices or automatic ring detectors will give rise to bell tinkle or
noise and may cause false tripping of the ring detector. Should such problems occur,
the user is not to contact Telecom faults service.
3. Should this equipment become physically damaged, disconnect immediately from
the Telecom connection and power source and contact your nearest service agent.
4. To relocate this equipment please.
1) Disconnect the equipment from the Telecom connection.
2) Disconnect the equipment from the power source.
3) Reconnect the equipment to the power source.
4) Reconnect the equipment to the Telecom connection.
5. If the supply cord of this equipment is damaged, it must be replaced by the special
cord (Parts No.: HH2-1910).
6. Not all standard telephones will respond to incoming ringing when connected to the
extension socket.
7. This device may be subject to bell tinkle, or mistakenly enter receive mode when
calls are made from another device on the same line. If this occurs, the problem
should not be referred to the Telecom Faults service.
8. Please note when you connect an extension phone to this device, if you use an
extension phone which has features such as “last number redial”, redial memory
numbers may be lost.
Telecom FaxAbility
In New Zealand, Telecom N.Z. offers the FaxAbility capability. This service allows you to
assign two numbers to your line: one for fax and one for telephone. When the fax
number is called, the network sends a specific ring tone which your unit recognises and
automatically handles as a fax call. If the telephone number is called, a different ring
tone is sent out from the network so that the call is handled as a voice call. This means
that there is no switching delay at the caller’s end.
Contact Telecom for connection information.