Filter
Top Products
Chapter 14 Summary of Settings 14-7
Summary of
Settings
ECM RX
RX MODE
INCOMING RING
RING COUNT
MAN/AUTO SWITCH
F/T RING TIME
REMOTE RX
REMOTE RX ID
MEMORY RX
RX PAGE FOOTER
Enables/disables Error Correction Mode (ECM) during
reception.
Selects the receive mode (1 Chapter 8).
If you select FAX/TEL AUTO SW, you can select
additional sub-settings (1 p. 8-5).
When the RX MODE setting is set to FAX ONLY MODE
or FAX/TEL AUTO SW, this setting enables/disables
ringing when the FAX receives a call.**
Selects the number of rings before the FAX begins
receiving.
When the receive mode is set to MANUAL MODE, this
setting determines if the FAX switches to fax receive
mode after it rings for a specified time.
If you select ON above, this setting selects the length of
time the FAX rings before switching to fax receive
mode.
Enables/disables remote receiving.
If you select ON above, this setting selects the remote
receiving ID.
Enables/disables reception of a document in the FAX’s
memory when a problem occurs during reception.
Enables/disables printing of the reception date and time,
page number, and transaction number
(TX/RX NO.) at the bottom of each received fax page.
ON
OFF
FAX ONLY MODE
NET SWITCH*
FAX/TEL AUTO SW
OFF
ON
2 TIMES
(1 to 99)
OFF
ON
15 SEC
(1 to 99)
ON
OFF
25
(00 to 99)
ON
OFF
OFF
ON
*This setting is available for certain countries only.
**Even if you have set INCOMING RING to ON, ringing will only occur if you have connected the optional handset or
a telephone to your unit.
RX (Reception) SETTINGS Menu
For details on accessing the settings below, see p. 14-3.
The selectable settings and the default settings vary depending on the country where you
have purchased the FAX. The values shown here are average values.
For the default settings for your FAX, see Appendix B.
Setting Description Sub-Settings