Filter
Top Products
Chapter 6 Speed Dialling 6-11
Speed Dialling
■ If you selected REGULAR TX in step 17:
18 Press Set.
Ex:
19 Press Stop to return to standby mode.
Ex:
■ If you selected PSWD/SUBADDRESS in step 17:
The other party’s fax machine may require an ITU-T standard subaddress and/or
password to receive faxes. The subaddress/password you register here must match
exactly the one(s) registered on the other party’s fax machine. Contact the other party
to check their settings.
When sending with a subaddress/password, the other party’s fax machine receives the
fax only if your subaddress/password matches theirs. Their fax machine then handles
the received fax according to the feature they are using.
You also need to register a subaddress/password when polling a fax machine that
requires these settings (1 p. 9-10).
Continue with the steps below to register a subaddress/password:
18 Press Set twice.
Ex:
19 If a subaddress is required, use the
Ex:
numeric buttons to enter it.
• If a subaddress is not required, ignore
this step.
• If you have already registered a
subaddress that you want to keep,
ignore this step.
20 Press Set twice.
Ex:
21 If a password is required, use the
Ex:
numeric buttons to enter it.
• If a password is not required, ignore this
step.
• If you have already registered a
password that you want to keep, ignore
this step.
4321
PASSWORD
1234
SUBADDRESS
15:00 FaxOnly
A02=