Filter
Top Products
13-4 Machine settings Chapter 13
Name
2. RX REPORT
3. ACTIVITY REPORT
3.TX SETTINGS
1. ECM TX
2. MID PAUSE SET
3. AUTO REDIAL
1. REDIAL TIMES
2. REDIAL INTERVAL
4.TIME OUT
5.TX START SPEED
6. COLOR DIRECT TX
4. RX SETTINGS
1. ECM RX
2. FAX/TEL AUTO SW
1. RING START TIME
2. F/T RING TIME
3. DEFAULT ACTION
3. DRPD:SELECT FAX
Setting
OUTPUT NO
PRINT ERROR ONLY
OUTPUT YES
AUTO PRINT ON
AUTO PRINT OFF
—
ON
OFF
2 SEC (1 to 15)
ON
OFF
2 TIMES (1 to 10)
2 MIN. (2 to 99)
ON
OFF
33600bps
14400bps
9600bps
7200bps
4800bps
2400bps
OFF
ON
—
ON
OFF
—
8 SEC (0 to 30)
15 SEC
(10 to 45)
RECEIVE
DISCONNECT
DOUBLE RING
SHORT-SHORT-LONG
SHORT-LONG-SHORT
OTHER RING TYPE
NORMAL RING
Details
p. 10-4
p. 10-2
p. 8-5
p. 9-2
p. 9-5
Description
Enable/disable automatic printing of a transmission
report after receiving.
Enable/disable automatic printing of an ACTIVITY
REPORT after every 20 transactions.
—
Enable/disable Error Correction Mode (ECM) during
sending.
Select the pause length when you press [Redial/Pause].
Enable/disable automatic redialing.
If you select <ON>, select the number of redialings.
If you select <ON>, select the length of time between
redialings.
Enable/disable automatic scanning without having to
press [Start] after using speed dialing or redialing to
send a document.
Select the speed at which the machine starts
transmitting.
Enable/disable sending of color documents to fax
machines that do not have color faxing capability.
—
Enable/disable Error Correction Mode (ECM) during
reception.
If you select <FAX/TEL AUTO SW> as the receive mode,
customize its settings.
Select the time the machine takes to check whether a
call is a fax or voice call.
Select the ring length for voice calls.
Select whether the machine switches to receive mode
after the ring time has elapsed.
If you select <DRPD> as the receive mode, select the
ring pattern for the machine.