Filter
Top Products
Chapter 3 Print media handling 3-3
Photo Paper Pro PR-101
A thick paper with a treated surface that enhances gloss and provides superior color
reproduction. It is ideal for printing high-quality photographs.
Size: Letter, A4, 4 × 6 in. (101.6 × 152.4 mm)
Quantity: 1 sheet, 20 sheets (4 × 6 in./101.6 × 152.4 mm size)
Paper thickness lever position: Left
Drying time: 30 minutes
Use for: Printing from your computer/photo printing/copying
•Load the paper with the glossier side facing up.
•Do not attempt to dry the ink with a hairdryer or by exposing printed sheets to direct
sunlight.
Photo Paper Pro PC-101S
Made from the same stock as Photo Paper Pro PR-101, these cards are intended for printing
images that cover the entire surface of the card, without a white border.This paper is ideal for
printing high quality photographs.
Size: 4 × 6 in. (101.6 × 152.4 mm)
Quantity: 20 sheets
Paper thickness lever position: Left
Drying time: 30 minutes
Use for: Printing from your computer/photo printing/copying
•Load the paper with the glossy side facing up.
High Gloss Photo Film HG-201
A bright white finish film that lends striking visual power to charts, graphs, and photographic
images. It creates a sharper and more vivid color output than is possible with coated paper.
Size: Letter, A4
Quantity: 1 sheet
Paper thickness lever position: Left
Drying time: 2 minutes
Use for: Printing from your computer/copying
•If the film is curled, flatten it by curling it in the opposite direction.
•Load the film with the cut corner at the upper right.
Transparencies CF-102
Produce excellent contrast, sharpness, and color, creating crisp and professional overhead
presentations.
Size: Letter, A4
Quantity: 30 sheets
Paper thickness lever position: Left
Drying time: 15 minutes
Use for: Printing from your computer/copying
•Although you can print on either side of CF-102 transparencies, best results can be obtained
by printing on the side toward which it curls when held by the edge.
•Remove each transparency after it is delivered, being careful not to touch any surfaces.
Do not allow transparencies to stack up in the paper output tray.
•Load one sheet of plain paper as the last sheet in the stack.