Canon F80 Printer User Manual


 
Chapter 3 Print media handling 3-9
Loading banner paper
NOTE
•Always leave an extra sheet at the end of the banner—just in case the type runs over.
•Printing on banner paper may require considerable amounts of ink, so use new ink tanks if necessary.
•For best print results on banner paper, use light design patterns.
Follow this procedure to load banner paper in the multi-purpose tray.
1 Make sure the paper thickness lever is
set to the right.
•For details, see p. 3-5.
2
Remove the tray cover and multi-purpose
tray, and place the machine near the edge
of a table so that the paper can flow over
the edge as it exits the machine.
3 Cut the banner paper to the required
length and place it behind the machine
on a flat surface.Then insert the first
sheet and press gently down on the
sheet q.Adjust the paper guide to the
width of the paper w.
•Press down gently on the sheet until paper
feeding starts.
•Make sure the sheets behind the machine are
aligned with the first sheet.
4 Set your computer to print on banner
paper.
•Allow the paper to flow over the edge of the
table as it exits the machine.
q
w