3-2 Print media handling Chapter 3
Bubble Jet Paper LC-301
Developed for high quality printing with minimal or no smearing when in contact with water
or damp surfaces.This specially coated paper produces bright and vivid colors and stands up
to normal office highlighters.
Size: Letter, A4
Quantity: Approx. 100 sheets (20 lb. or 75 g/m
2
) or maximum stack height of 0.4 in. (10 mm)
Paper thickness lever position: Left
Use for: All functions
High Resolution Paper HR-101N
Designed to produce near-photographic quality print output with sharp and vivid graphics.
Size: Letter, A4
Quantity: Approx. 80 sheets or maximum stack height of 0.4 in. (10 mm)
Paper thickness lever position: Left
Use for: Printing from your computer/copying
•Load the paper with the whiter side facing up.
•Remove the sheets from the paper output tray before the count reaches 50. If the paper
curls, remove each sheet as it is delivered in the paper output tray.
Glossy Photo Paper GP-301/GP-301N
A high gloss, thick paper that produces the look and feel of a photograph.
Size: Letter, A4
Quantity: 1 sheet
Paper thickness lever position: Left
Drying time: 2 minutes
Use for: Printing from your computer/copying
•Remove each sheet after it is delivered, being careful not to touch any surfaces. Do not
allow the paper to stack up in the paper output tray.
•Load the paper with the whiter side facing up.
•Do not use the loading support sheet included with this print media.
Glossy Photo Cards FM-101
Made from the same stock as Glossy Photo Paper GP-301, these cards allow you to print
images over the entire area of the card.
Size: 4.7 × 8.4 in. (119 × 214 mm)
Quantity: 20 sheets
Paper thickness lever position: Left
Drying time:2 minutes
Use for: Printing from your computer/copying
•Print the image so that it extends beyond the perforations and then trim off the unwanted
white margins.
•Load the paper with the glossy side facing up.
•Do not use the loading support sheet included with this print media.