Filter
Top Products
2-7
2
Registering Information
Setting the Telephone Line Type
Before using your machine, you need to make sure it is set for your telephone line type. If you are unsure of your telephone line
type, check with your local telephone company. The factory default setting of your machine varies depending on the current
country selection. You can print the USER’S DATA LIST to check the current setting. (→ p. 2-6). If you need to change the
setting, follow this procedure.
1 Press Additional Functions.
2 Use (–) or (+) to select 3.FAX SETTINGS.
3 Press OK three times.
4 Use (–) or (+) to select 2.TEL LINE TYPE.
5 Press OK.
6 Use (–) or (+) to select the telephone line type setting you want to set.
• You can select from the following:
– ROTARY PULSE (For pulse dialling)
– TOUCH TONE (For tone dialling)
7 Press OK.
8 Press Stop/Reset to return to standby display.
Dialling Through a Switchboard
A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your machine is connected through a PBX or other
telephone switching system, you have to dial the outside line access number first, and then the number of the party you are
calling.
To facilitate this procedure, you can register the PBX access type and the outside line access number under the R key so that
you only need to press this key before dialling the fax/telephone number you want to reach. See below for details.
The settings available and the factory default setting vary depending on the current country selection. You can print the USER’S
DATA LIST to check the current setting. (→ p. 2-6)
1 Press Additional Functions.
2 Use (–) or (+) to select 3.FAX SETTINGS.
ADDITIONAL FUNCTIONS
3.FAX SETTINGS
▲
▼
FAX SETTINGS
1.USER SETTINGS
USER SETTINGS
1.TEL LINE SETTINGS
TEL LINE SETTINGS
1.USER TEL NO.
TEL LINE SETTINGS
2.TEL LINE TYPE
▲
▼
Ex:
TEL LINE TYPE
TOUCH TONE
Ex:
TEL LINE TYPE
ROTARY PULSE
▲
▼
TEL LINE SETTINGS
3.TX START SPEED
ADDITIONAL FUNCTIONS
3.FAX SETTINGS
▲
▼
SB_PC1270D_FG_EN.book Page 7 Monday, February 18, 2002 12:20 PM