Filter
Top Products
5-8
Receiving While Performing Other Tasks
Since the machine is a multitasking device, it can receive faxes and voice calls while you are performing other tasks.
If you receive a fax while you are performing certain tasks, the machine stores the incoming fax in memory. Then, as soon as
you finish your task, the machine automatically prints the fax.
• If you copy or print a document from the PC, printing of the received fax is suspended and resumed after copying or printing from the
PC is finished.
Receiving Faxes in Memory When a Problem Occurs
If the machine encounters a problem when it is receiving a fax, the machine automatically stores the unprinted pages of the fax
in memory, and the LCD displays RECEIVED IN MEMORY as well as one or more messages. When the problem is cleared,
the machine automatically prints the fax which was stored in memory. For an explanation of the message(s) and details on the
action to take, → p. 8-1.
• The machine memory can store up to approximately 79 pages.*
• Once the pages are printed, they are deleted from memory.
• If the memory becomes full, you will not be able to receive the remaining pages. Contact the other party and ask them to resend the
remainder of the fax.
* Based on Canon Fax Standard Chart No. 1, standard mode.
Cancelling Receiving
Follow this procedure if you want to stop receiving a fax before reception is completed:
1 Press Stop/Reset.
• The machine asks you to confirm that you want to cancel.
2 Press (–) to cancel receiving.
• If you change your mind and want to continue receiving, press (+).
CANCEL DURING TX/RX?
< YES NO >
▲
▼
SB_PC1270D_FG_EN.book Page 8 Monday, February 18, 2002 12:20 PM