Filter
Top Products
4-7
4
Sending Faxes
Cancelling Sending
Cancelling Memory Sending
■ To cancel memory sending while documents are being scanned using the ADF
1 Press Stop/Reset.
• Scanning is cancelled.
■ To cancel memory sending after all documents have been scanned
❚ While documents are being sent:
1 Press Stop/Reset.
• The machine asks you to confirm that you want to cancel.
2 Press (–) to cancel sending.
• If you change your mind and want to continue sending, press (+).
• The machine prints an ERROR TX REPORT. (→ p. 7-3)
❚ While documents are waiting to be sent:
• You can operate Fax Monitor or Delete when the Function key is lit. If the Function key is not lit, press it. However, you do not
need to press Function in step 1 to execute the Fax Monitor function if FAX MONITOR is programmed in PROGRAM 1-TOUCH
KEY. (→ p. 9-4)
1 Press Function.
2 Press Fax Monitor.
3 Use (–) or (+) to select 2.TX RESERVE STATUS.
4 Press OK.
5 Use (–) or (+) to select the document to be cancelled by checking the
reservation number and the fax number.
6 Press Delete.
• The machine asks you to confirm that you want to delete the document.
7 Press (–) to cancel sending.
• If you change your mind and want to continue sending, press (+).
• You can also cancel sending in Memory Reference. (→ p. 4-16)
CANCEL DURING TX/RX?
< YES NO >
▲
▼
FAX MONITOR
2.TX RESERVE STATUS
▲
▼
Ex:
--:-- 0013 TX STNDBY
905795 1111
▲
▼
OK TO DELETE?
< YES NO >
Ex:
TX/RX NO. 0013
ERASING END
▲
▼
SB_PC1270D_FG_EN.book Page 7 Monday, February 18, 2002 12:20 PM