Filter
Top Products
9-7
9
Setting the Additional Functions
3.F/T SWITCH ACTION Selects the action taken after the F/T RING TIME expires.
RECEIVE The fax switches to fax receive mode automatically at that point and
starts to receive the document.
DISCONNECT The fax disconnects the call.
3.INCOMING RING When the machine is set to FaxOnly, set whether the machine rings
when it receives a call.
OFF The fax does not ring when it receives a fax. (In energy saver mode,
the fax may ring one or two times.)
ON The fax rings when it receives a fax if a telephone is connected.
RING COUNT Sets the number of incoming rings before the machine answers.
1 to 99 TIMES
4.MAN/AUTO SWITCH Sets the machine to switch to document receive mode after ringing
for a specified length of time in the manual receive mode.
OFF The fax keeps ringing until someone answers the call manually with
a connected extension telephone.
ON F/T RING TIME: Sets the length of time to elapse before the
machine switches to the document receiving.
1 to 99 SEC
5.REMOTE RX Enables/disables remote receiving. (→ p. 5-5)
ON Remote receiving is turned on.
REMOTE RX ID You can dial code on the remote extension to start receiving a
document.
A combination of two characters using 0 to 9, A and (25) is
possible.
OFF Remote receiving is turned off.
PRINTER SETTINGS Sets the print functions.
1.RX REDUCTION Receives images at a reduced size.
ON Turn on image reduction.
1.RX REDUCTION AUTO SELECTION: Reducing size is set to auto.
FIXED REDUCTION: Reducing size is preset.
97%, 95%, 90%, 75%
2.SELECT REDUCE DIR VERTICAL ONLY: Reduction is performed in the vertical direction
only.
HORIZ & VERTICAL: Reduction is performed in the horizontal
and vertical direction.
OFF Image reduction is turned off.
Name Descriptions
SB_PC1270D_FG_EN.book Page 7 Monday, February 18, 2002 12:20 PM