Filter
Top Products
9-5
9
Setting the Additional Functions
6.OFFHOOK ALARM Enables/disables the offhook alarm that alerts you when the handset
is not in the handset cradle.
ON After reception, the offhook alarm sounds when the handset of
extension telephone is left off the hook.
OFF No offhook alarm.
7.R-KEY SETTING The R-KEY setting allows you to set how the fax connects to PBX. If
your fax machine is not connected through a PBX, you can ignore
these settings.
PSTN The fax is connected to the outside line.
PBX The fax is connected through a PBX. Select one of the following
settings, depending on the type of PBX in service. Three settings are
available:
HOOKING
EARTH CONNECTION
PREFIX If you select PREFIX, you can set a
number up to 20 digits long, including the
“P” at the end. (→ 2-8)
REPORT SETTINGS Sets the report setting.
1.TX REPORT Enables/disables automatic printing of a transmission report.
OUTPUT NO No report is printed.
PRINT ERROR ONLY Prints a report only when a transmission error occurs.
REPORT WITH TX IMAGE If you select PRINT ERROR ONLY or OUTPUT YES, enables/
disables printing of the first page of the fax under the report.
ON Prints a first page only when a transmission error occurs.
OFF No first page is printed.
OUTPUT YES Prints a report every time you send a document.
2.RX REPORT Enables/disables automatic printing of a reception report.
OUTPUT NO No report is printed.
PRINT ERROR ONLY Prints a report only when a reception error occurs.
OUTPUT YES Prints a report every time you receive a document.
3.ACTIVITY REPORT Enables/disables automatic printing of an ACTIVITY REPORT after
every 20 transactions.
ON Prints the ACTIVITY REPORT.
OFF No ACTIVITY REPORT is printed.
TX SETTINGS Sets the transmission functions.
1.ECM TX ECM (error correction mode) transmission is turned on or off.
ON All transmissions are conducted with ECM if the other party’s fax
supports ECM.
OFF ECM is turned off.
Name Descriptions
09_EN.fm Page 5 Tuesday, February 19, 2002 8:38 AM