Filter
Top Products
6-1
6
Special Features
Chapter 6
Special Features
Special Dialling
This section explains special dialling features, such as dialling through a switchboard, dialling an overseas number, and
switching temporarily to tone dialling.
■ Dialling an Overseas Number (With Pauses)
When you dial or register an overseas number, you may need to insert a pause within and/or after the number. The length and
location of the pause depends on the telephone system of your country.
1 Press FAX to set to Fax Mode.
2 Prepare the document and load it facing down into the ADF.
• If you use the platen glass to send a document, → p. 4-6.
3 Use the numeric keys to dial the international access code.
• If you enter the wrong number, press Stop/Reset, then enter the correct number.
• For details on international access codes, contact your local telephone company.
4 If necessary, press Redial/Pause to enter a two-second* pause (p).
• For a longer pause, press Redial/Pause again for another two-second* pause.
Alternatively, you can change the length of the pause. (→ p. 9-5)
* The pause length varies depending on the current country selection.
5 Use the numeric keys to dial the country code, the area code, and the fax/
telephone number of the other party.
• If you enter the wrong number, press Stop/Reset and start again from step 3.
6 If necessary, press Redial/Pause to enter a pause at the end of a number.
• A pause at the end of a number (P) is fixed to 10 seconds.
7 Press Start to begin scanning for sending.
• To cancel sending after dialling has started, press Stop/Reset then (–). (→ p.
4-7)
• To take advantage of the speed dialling features of your machine, register
frequently used overseas numbers for one-touch or coded speed dialling. (→ pp. 3-
2, 3-4)
Ex:
FAX 03/12 2001 15:30
FaxTel STANDARD
Ex:
MEM IN USE
0%
(Currently used memory)
DOCUMENT READY
(Standby to scan)
Ex:
TEL= 00
Ex:
TEL= 00P
Ex:
TEL= 00p81123
Ex:
TEL= 00p81123P
▲
SB_PC1270D_FG_EN.book Page 1 Monday, February 18, 2002 12:20 PM